Showroom Cleaning in Dublin 4 & Ballsbridge
Showroom cleaning across Dublin 4 and Ballsbridge, from the motor showrooms along Merrion Road to premium interiors and display space. Specialist finishes handled by the same named team every visit, on a schedule built around your appointment diary rather than through the middle of it.
- Over 100 five-star Google reviews
- 2,000+ cleans completed since 2020
- Not perfect? We re-clean it free
- The same named team on every visit
- Products tested on your finishes before general use
Showroom Cleaning Services in Dublin 4
In this part of the city the finishes are usually the product. Marble, walnut, brass, glass balustrade, high-gloss porcelain. Cleaning them is a materials job before it is a cleaning job, and the wrong product on the wrong surface is a cost you cannot undo. We identify every finish at the survey, agree the method for each one, and work around your appointments rather than through them.
What we cover
- Showroom floors on marble, stone, timber and porcelain
- Glass frontage and glass balustrades
- Internal glass, display cases and mirrors
- Display plinths, fixtures and polished metal
- Client reception and consultation areas
- Private meeting and handover suites
- Customer washrooms and refreshment areas
- Exhibition and event space turnaround
- Back of house and staff areas
- Periodic deep clean and finish maintenance
How it runs
- Scheduled around your appointments, not through them
- The same named team every visit, inducted before they attend
- Products tested on an inconspicuous area of your finish before general use
- Supervisor checks and one direct point of contact
That third line is the one that separates this from a general cleaning contract. Nobody applies anything to a marble floor or a brass fixture in one of our contracts until it has been tested somewhere it will not matter. It takes ten minutes at survey and it removes the single largest risk in a premium showroom.
Unsure what your floor finish actually needs? We can test it at the free survey. Our showroom cleaning across Dublin page sets out how the same approach runs elsewhere in the city.
The Showrooms and Display Spaces We Clean Across Dublin 4
Motor showrooms
The Merrion Road corridor. Premium marque showrooms with large glass frontages, high-gloss floors, and a handover suite where the entire sale is actually completed.
Interiors and design showrooms
Ballsbridge and Pembroke Road. Marble, timber, brass and glass sitting out on open display, which means the wrong product is not a service issue, it is a replacement cost.
Kitchen, bathroom and stone showrooms
Around Merrion Road and over on the Donnybrook side. Live water displays, stone worktops, high-gloss units, and an appointment-led diary that leaves a narrow window to work in.
Art and antique galleries
Ballsbridge and Elgin Road. Delicate stock, a strict no-touch protocol, and methods chosen to keep noise and airborne dust down.
Private clinics with a retail or display area
Northumberland Road and Shelbourne Road. A clinical sanitation standard on one side, a client-facing display on the other, and discretion across both.
Embassy and diplomatic display space
The Ballsbridge embassy quarter. Security and discretion requirements, consistent personnel, and no tolerance at all for a rotating crew.
Exhibition and trade display space
The RDS and the streets around it. Event-driven turnaround work, sometimes overnight, between one show closing and the next one building.
Boutique retail
Donnybrook and Sandymount. Small footprint, owner-managed, and a finish standard that has to match the postcode it trades in.
The Showroom Problems Dublin 4 Businesses Call Us About
Your last cleaner damaged a finish
This is the call we get most often in Dublin 4, and almost nobody in this industry will talk about it. Wrong-pH product etches marble. Over-wetting lifts the finish off a timber floor. An abrasive pad puts permanent swirl marks into brass. None of it shows up on day one, all of it is expensive, and none of it is repairable with a mop. We test before we apply and we follow the manufacturer's guidance for the surface instead of guessing.
Cleaning happens in the middle of a client appointment
In an appointment-led showroom, a vacuum running while someone is being talked through a 40,000 euro kitchen is a lost sale, not an inconvenience. The schedule gets built against your diary. Where an overlap genuinely cannot be avoided, we use low-noise equipment and work away from the room in use.
Glass balustrades and high glazing never look finished
Premium showroom glass has to be streak-free, not merely clean, and half of it is usually out of comfortable reach. That needs the right technique and the right access equipment. A ladder and a cloth will get you a clean balustrade that still looks wrong from the far side of the room.
You do not know who is in your building
Embassy quarter, private clinic, gallery. A rotating agency crew with a different face every fortnight is not acceptable in any of them. You get the same named team, inducted before they attend, and you know in advance who is coming.
Nobody can turn a space around before an event
Around the RDS the gap between one show closing and the next one opening is not a realistic cleaning window unless somebody planned it weeks earlier. Turnaround work is scheduled from your show calendar in advance, with team size set for the window. It is not something to improvise on the night.
Dust settles on stock that cannot be handled
Gallery pieces, antiques, delicate display items. "Just give it a dust" is a risk, not an instruction. A written no-touch protocol says exactly what we clean and exactly what we do not go near, and low-dust methods keep the stock undisturbed.
If a clean does not meet the specification, we come back and put it right at our expense.
Sound familiar? Call 01 963 6655 or book a free site survey, and we will test your finishes before we quote.
How Contract Cleaning Works With Premier
Free site survey, with a product test
We visit your Dublin 4 or Ballsbridge showroom, identify every floor and surface finish, and test the product on an inconspicuous area. No charge, no obligation. Book your survey
Written specification and fixed quote
Surface by surface, task by task, with the product and the method named against each finish rather than one generic line covering everything.
Access, discretion and personnel
Keys, fobs or alarm codes, plus whatever your building's security or discretion requirements call for. Insurance certificates and method statements are issued before the first visit.
Team assignment and mobilisation
A named team is assigned and stays on your site, inducted on your finishes, your no-touch stock rules and your appointment pattern.
Delivery and supervision
Cleans scheduled around your diary, supervisor spot checks, and one contact who knows your building.
Review and adjust
A periodic contract review, and a check on how each finish is holding up over time rather than only on whether the place looks clean this week.
Changing provider mid-contract? We manage the overlap. There is no gap between your current cleaner's final visit and our first. Where TUPE applies, we work it through with your landlord directly.
Event and exhibition turnaround. For work around the RDS or any exhibition space, turnaround is treated as its own scheduled piece of work rather than an extension of a regular clean. Give us the show calendar in advance and we plan team size against the window you actually have.
Cleaning Premium Showroom Finishes in Ballsbridge
Most cleaning specifications in this city describe rooms. In Dublin 4 the specification has to describe surfaces, because that is where the money and the risk both sit.
Marble and natural stone
This is where most of the damage happens. An acidic or wrong-pH product etches marble permanently, and the fix is a repolish, not a re-clean. We work with pH-neutral stone products and test on an inconspicuous area before anything goes on the main floor.
Timber and engineered floors
Over-wetting is the killer here. Damp mop, correct product, and no standing water anywhere. A sealed timber floor can lose its finish inside a year if it is cleaned as though it were vinyl.
Glass balustrades and high-level glazing
Both are common in premium showrooms and both need a streak-free finish rather than a wipe. We measure the elevation at survey, agree the access method, and carry out a working at height risk assessment before anyone goes up.
Polished metal and brass
Non-abrasive only, without exception. One abrasive pad puts swirl marks into brass that no amount of polishing takes out afterwards. Any interiors showroom manager reading this will already be nodding.
Car Showroom Cleaning in Dublin 4
Merrion Road is Dublin's premium marque corridor, and those floors are usually polished porcelain or resin rather than the harder-wearing surfaces you find in a volume dealership. High-gloss only reads as high-gloss if the maintenance regime keeps it there, so the floor programme is built around the finish rather than around footfall. The handover suite gets treated as the highest-specification room in the building, because that is exactly what it is to the customer sitting in it. Products used anywhere near vehicles are agreed with you at survey and named in the method statement.
Discretion and consistent personnel
In the embassy quarter, in a private clinic and in a gallery, who comes through the door is a genuine requirement rather than a preference. The same named team attends every visit, and where your building has specific screening or clearance requirements we agree in writing what we can provide before anything is signed.
No-touch stock protocol
Which surfaces we clean and which display items we do not go near is agreed at the survey and written into the specification. In a gallery or an antiques display that is not negotiable, and we would not want it to be.
Your finishes are your product. We protect them, we do not just clean them.
What Showroom Cleaning Costs in Dublin 4 and Ballsbridge
The usual variables apply: floor area, glass area and height, frequency, access window, washroom count, whether periodic works sit inside the contract, and whether consumables are included.
But in Dublin 4 the biggest cost driver is not area at all. It is finish type. A marble floor and a vinyl floor can measure the same square metres and still price very differently, because marble needs its own product, its own method and usually its own periodic programme of burnishing or re-sealing. A quote built on area alone has quietly ignored that, and it resolves one of two ways: the service level drops, or the finish takes the damage. We quote finish by finish off the survey.
The second point is the uncomfortable one. Repairing a damaged finish costs far more than the contract that damaged it. Re-polishing an etched marble floor can run close to a year of cleaning. That is the arithmetic that turns the cheapest quote into the most expensive decision, and it is worth doing before you sign anything.
On rates: contract cleaning in Ireland operates under a legally binding Employment Regulation Order administered by the Workplace Relations Commission. From 1 January 2026 the sector minimum is 14.80 euro per hour for workers aged 20 and over, with sick pay provisions, an unsocial hours premium for work between midnight and 6am, and overtime rules alongside it.
Which means a compliant quote carries PRSI, supervision, materials, equipment and margin on top of the hourly rate. A number well below the others deserves one question: how does that rate meet the ERO? The consequences of a non-compliant supplier land in your showroom. (Correct as of August 2026. The current order is published by the Workplace Relations Commission.)
Survey free, quote in writing, and every surface priced into the specification before anything is signed.
Why Ballsbridge Showrooms Choose Our Cleaning Company
Most people looking for a showroom cleaning company in Ballsbridge are not price shopping. They are trying to avoid repeating something that already went wrong.
Finish protection is built into the specification
Product and method named per surface, tested at survey before general use. In this postcode that is the block that matters, because the fear here is damage rather than dust.
Trading since 2020, on more than a decade in contract cleaning before that
Over 2,000 cleans completed. Enough surfaces to have learned which products behave and which ones look fine until month six.
Over 100 five-star Google reviews
The recurring themes are consistency and communication, which are the two things a quality-first buyer is really paying for.
If your clean is not perfect, we will do it again, for free
Straightforward, and it has been the arrangement since day one.
Consistent personnel, and paperwork before the first visit
The same named team attends your building, and insurance certificates and method statements go to you and to your landlord ahead of the first clean. We are fully insured. Where your building carries specific screening, clearance or confidentiality requirements, tell us at the survey and we will confirm in writing exactly what we can put in place.
You deal with the people who run the company
Catalin Fatul and Monica Fatul are both directly contactable, with Fernanda Lopes and Igor Ribeiro supervising on site, both health and safety certified. A premium buyer wants accountability attached to a name, not a reference number.
On a marble floor the wrong product does not show up on the first day. It shows up six months later, and by then it is a repolish, not a clean.
Catalin Fatul, Director, Premier Contract Cleaning
Our Dublin 4 and Ballsbridge Service Area
The Merrion Road corridor. Merrion Road, Anglesea Road and the RDS. Premium marque motor showrooms and exhibition space sitting almost side by side, with big glass frontages, high-gloss floors, and a working calendar that bends around RDS show dates whether you want it to or not.
Showroom Cleaners in Ballsbridge
Pembroke Road, Shelbourne Road, Northumberland Road, Elgin Road and Herbert Park, taking in the embassy quarter, with the Aviva Stadium as the landmark everyone navigates by. Interiors and design showrooms, galleries, private clinics and diplomatic display space. Discretion, consistent personnel and specialist finishes come up in almost every conversation here, usually in that order.
Retail Cleaning in Dublin 4
Donnybrook and Sandymount, running out to the Ringsend edge. Boutique retail and small high-finish showrooms, mostly owner-managed, with a small footprint but a presentation standard that has to match the street it sits on. These are short contracts by floor area and demanding ones by expectation, which suits a specification written surface by surface.
Getting there and getting in. The DART stops at Lansdowne Road, Sandymount and Sydney Parade, and all three put a team within walking distance of most of this area. That is worth more than it sounds in a postcode with heavy parking restrictions, because attendance never depends on finding a space. It also makes early morning access practical, before the first appointment of the day.
Showroom Cleaning in Dublin 4: Common Questions
The biggest variable here is not floor area, it is finish type. Marble, timber and high-gloss surfaces each need different products, different methods and often their own periodic programme, so two rooms of identical size can price very differently. We survey free and quote finish by finish, against the ERO.
Yes. Marble takes pH-neutral stone products, and we test on an inconspicuous area before anything goes on the main floor. A wrong-pH or acidic product etches marble permanently, and the repair is a repolish rather than a re-clean, so this is not a surface to guess at.
Product and method are named against each surface in the written specification, and tested at the survey before general use. Nothing gets applied to a finish we have not tried somewhere it will not matter. Where a manufacturer has published care guidance for your surface, we work to it.
Yes. In an appointment-led showroom the schedule is built from your diary, not from our rota, and we agree the windows at the survey. Where an overlap cannot be avoided we use low-noise equipment and work away from whichever room is in use at the time.
The same named team attends your building on every visit, inducted before they start, so you always know who is coming. We are fully insured, with certificates issued before the first clean. Tell us at the survey what your building's screening or clearance requirements are and we will confirm in writing what we can put in place.
Turnaround work is planned in advance from your show calendar, with team size set against the actual window between one event closing and the next building. It is scheduled as its own piece of work rather than squeezed into a regular visit, and it needs lead time rather than a phone call the evening before.
No. Valeting stays with your own team or supplier, and the two jobs do not overlap. Our work is the space around the cars: the floor programme, the glass frontage, the display areas, the handover suite and front of house, which is where the customer forms most of their impression anyway.
Our start date is aligned to your existing provider's notice period, so the changeover happens without a missed visit. Where TUPE applies, we deal with it. Buyers in this postcode usually want a trial period as well, and that is a reasonable thing to ask for before committing to a full term.
We return and redo it at no cost. Supervisor checks sit behind that so problems are found by us rather than by a client walking through your reception, which in an appointment-led showroom is the version that actually costs you something.
Related Services
Showroom Cleaning in Other Dublin Areas
Book a Free Site Survey for Your Dublin 4 or Ballsbridge Showroom
If a previous contractor has already marked a finish, or you are about to hand a new building to someone, start with the survey. We walk the showroom, identify every surface, test our products where it matters, and put a written specification and a fixed price in front of you. No pressure and no obligation attached to any of it.
No obligation. We will walk the showroom, identify every surface finish, test our products, and put a written specification and fixed price in front of you.


